Proportional Solenoid GP80-4-A

Products

Quality Assurance

Tel:+86-372-2595077/2595078/2595088

Fax:

Email:aykd_scb@126.com

Address:High-tech Development Zone, Anyang City, Henan,China

Description
Parameters
Related products
Inquiry

Description

Purpose

This product is a set of electric-mechanical transformation, in the range of the rated stroke and rated current, output force is proportional to input signal. Together with proportional control amplifier, it can be realized accuracy control to electric-hydraulic valve spool. It has characteristic of long stroke, high repeat accuracy and high output force, etc. as a power component of directly proportional spillover valve, proportional flux valve, and proportional throttle valve, electric-hydraulic proportional combination valve (PQ valve).

Parameters

Key Parameters

Code	GP80-4-A
Rated Stroke (mm)	8
Total Stroke (mm)	≥9
Rated Current (A)	0.68
Rated Force (N)	100
Room Temperature Resistance 20℃ (Ω)	40
Force Lag Characteristic （%）	≤4
Current Lag Characteristic （%）	≤3
Electrify Frequency （%）	100
Repeat Accuracy (%)	≤1
Static Oil Pressure (MPa)	21
Thermal Endurance Class	F

Steady Stroke-Force Curve

Anyang kaidi Electromagnetic Technology Co.,ltd

Externality & Installation Dimensions

Product Code: GP80-4-A

Anyang kaidi Electromagnetic Technology Co.,ltd

Operating Notice

Installation Position The vent hole must be installed on above.
Exhaust In order to realize stabilization control, please make the air out of the solenoid thoroughly, and full of oil. When exhausting, please open the bolt slowly and slowly. Be careful the spilling!
Adjust The Bolt By Hand If there is no current at the beginning adjustment or because of electrical accident, you can turn the bolt by hand; set the pressure or flux of the valve temporarily, please make sure the handle bolt return to the position at normal operating.

Explanation Of Sample

If the application is beyond the catalogue, please contact with us.
Characteristic curve for reference only.
The main performance parameter is obtained in the conditions of lab. Finally explanation and changing of the parameters by KAIDI.